5mm Diameter 2 Flute Up Cut Carbide Router - Slot Drill for Wood, MDF etc. 22mm Flute Length

5mm Diameter 2 Flute Up Cut Carbide Router - Slot Drill for Wood, MDF etc. 22mm Flute Length
Zoom  Zoom
Our Price:  £4.40
List Price:  £6.60
Saving Of:  £2.20 (33%)
(Exc. 20% VAT)(£5.28 Inc. VAT)

Model:  EUC2-552250
Brand:  APT Carbide End Mills

Shipped Weight:  23 g

Availability:  

In stock, immediate despatch  

In stock, immediate despatch

APT Carbide End Mills

Carbide End Mills APT Brand


5mm Diameter 2 Flute Up Cut Carbide Router - Slot Drill. 22mm Length of Cut, 50mm Overall Length, 5mm Shank Diameter.

These 2 Flute Spiral router bits are suitable for use on Hardwood, Softwood MDF, Laminate Board, Plywood, Particle Board and other Sheeting, Insulation Panels, PVC and Acrylic.

Up Cut Spiral Routing Cutters have a sharp cutting edge that push the chips towards the router. They will produce a good quality finish on the bottom of the slot while retaining a good cutting speed, if chipping of the top surface is a concern then consider down cut type tools. Suitable for plunge cutting.

Use lower feed rate when depth of cut increases, choose cutters with the shortest flute length that is suitable for the job with as little overhang as possible. Clearance of cutting chips may be required to prevent chip jamming.

Suitable for CNC, hand held and desktop routers.

Made from wear resistant Uncoated Carbide for increased tool life.

Dimensions for EUC2-552250
Cutting DiameterLength of CutOverall LengthShank Diameter
5mm22mm50mm5mm
Speeds and Feeds, based on a max depth of 1 x diameter with high accuracy spindle and collets with optimum stability of spindle and workpiece holding, reduce feed rate for suboptimal conditions.
When cutting more than 1 x diameter reduce feed rate. For guidance only if vibration is produced try lowering the feed rate if not successful try raising feed very slowly, if no vibration is present increased feed rate may be possible.
AcrylicAluminium AlloyHard PlasticHardwoodLaminate
RPM 18000 Feed 7100 mm/minRPM 18000 Feed 5100 mm/minRPM 18000 Feed 6100 mm/minRPM 18000 Feed 7600 mm/minRPM 18000 Feed 8200 mm/min
Particle Board MDFPhenolicSoft PlasticPlywoodSolid Surface
RPM 18000 Feed 10000 mm/minRPM 18000 Feed 8000 mm/minRPM 18000 Feed 7200 mm/minRPM 18000 Feed 9000 mm/minRPM 18000 Feed 6000 mm/min

Continue ShoppingTell a Friend
Customer Reviews

Be the first to Write a Review for this item!

Search: