TPKN 1603 PDR NK135 Carbide Inserts for Milling PVD Coated for General Use APT

Our Price:	£5.90
List Price:	~~£8.84~~
Saving Of:	£2.94 (33%)

(Exc. 20% VAT)(£7.08 Inc. VAT)

Model: TPKN1603PDRNK135
Brand: APT Carbide

Shipped Weight: 7 g

Availability:

10 in stock, no more available

APT Carbide

Carbide Inserts APT Brand utilising modern Base Grades, MT-CVD & PVD Coatings and proven Chip Geometries

Carbide Inserts for Milling PVD Coated Grade NK135 (P35–M35–S15 + PVD TiN (Ti–Al–Si)N Coating) Main application – Carbon & Alloy Steel, extended application – Stainless Steel

Dimensions for TPKN 1603 PDR NK135 (mm) - Note the hole in this insert is used in the manufacturing process

Cutting Edge Length	Inscribed Circle	Thickness	Facet	Side Clearance
15.5	9.52	3.18	90°+15°	11°

General Cutting parameters

Material	Hardness HB	Cutting Speed VC: m/min	Depth of Cut ap(mm)	Feed f(mm)	Application Choice
Non alloyed steel 0-0.45% C	150-250	70-220	1.0-14.0	0.10-0.25	Good
Low alloyed steel	250-300	70-220	1.0-14.0	0.10-0.25	Good
High alloyed steel	200	70-220	1.0-14.0	0.10-0.25	Good
Corrosion resistant steel	200	70-220	1.0-14.0	0.10-0.25	Good
Stainless - Ferritic	200	40-120	1.0-8.0	0.10-0.20	OK
Stainless - Austenitic	180	40-120	1.0-8.0	0.10-0.20	OK
Stainless - Duplex	230-260	40-120	1.0-8.0	0.10-0.20	OK
Stainless - Martensitic	330	40-120	1.0-8.0	0.10-0.20	OK

	Shopping Basket