LNMX 100605 PNR-MM UM25 Carbide Milling Inserts PVD Coated for General Use

LNMX 100605 PNR-MM UM25 Carbide Milling Inserts PVD Coated for General Use
Zoom  Zoom
Our Price:  £3.60
List Price:  £5.40
Saving Of:  £1.80 (33%)
(Exc. 20% VAT)(£4.32 Inc. VAT)

Model:  LNMX100605PNRMMUM25
Brand:  Uni-tip Carbide

Shipped Weight:  5g


In stock, immediate despatch  

In stock, immediate despatch

Uni-tip Carbide

Carbide Inserts with CVD & PVD Coating by Uni-tip

LNMX 100605 PNR-MM UM25 Carbide Inserts for Milling PVD Coated Grade UM25. M25, P35, K35 with Multi Layer PVD Coating for all types of Steel, Stainless and conditionally Hi-temp Alloys and Cast Iron.

These economical inserts provide 4 cutting edges with a positive cutting action with the strength of a negative insert which lowers the cutting load with the ability to provide higher feed rates.

True 90° cutting angle for face milling, slotting cutting, ramping and helical interpolation.

Dimensions for LNMX 100605 PRN-MM UM25 (mm)
Cutting Edge LengthInscribed Circle or WidthThicknessHole DiaCorner RadiusSide Clearance
General Cutting parameters
MaterialHardness HBCutting Speed VC: m/minDepth of Cut ap(mm)Feed f(mm)Application Choice
Non alloyed steel 0-0.45℅ C150-25090-260 (170)1-90.05-0.30Good
Low alloyed steel250-30070-220 (160)1-90.05-0.30Good
High alloyed steel20070-180 (130)1-70.05-0.25Good
Corrosion resistant steel20070-190 (140)1-70.05-0.25Good
Stainless - Ferritic20070-180 (130)1-60.05-0.25Good
Stainless - Austenitic18070-180 (130)1-60.05-0.25Good
Stainless -  Duplex230-26060-130 (100)1-40.05-0.20OK
Stainless - Martensitic33070-180 (130)1-60.05-0.25OK
Grey cast iron180-26060-130 (100)1-90.08-0.35Optional
Spheroidal cast iron160-26090-160 (120)1-90.08-0.35Optional
Malleable / Tempered iron130-23060-100 (70)1-70.08-0.25Optional
Iron Based Hi-temp Alloys 200-280 HB200-28030-50 (40)1-40.05-0.15OK
Nickel or Cobalt Based 250 HB25015-30 (20)1-40.05-0.15OK
Nickel or Cobalt Based 30-58 HRC35015-25 (20)1-30.05-0.12OK
Hardened Steel40-50HRC45-60 (50)1-30.05-0.12



Ramping and Helical Interpolation Parameters
Cutter DiameterAngleRampingHelical cuttingHelical cuttingHelical cuttingHelical cutting
Dcα°Min Lr when ap=10Max hole diameterMax pitchMin hole diameterMax pitch

Continue ShoppingTell a Friend
Customer Reviews

Be the first to Write a Review for this item!