SDI4-06300-X25H 63mm Series 4 Spade Drill Insert Premium HSS with Hard Coating

Zoom

Our Price: £49.00(Exc. 20% VAT)(£58.80 Inc. VAT)

Model: SDI4-06300-X25H
Brand: APT Carbide

Shipped Weight: 92 g

Availability:

10 in stock, no more available

APT Carbide

Carbide Inserts APT Brand utilising modern Base Grades, MT-CVD & PVD Coatings and proven Chip Geometries

63mm Diameter Series 4 Spade Drill Insert with Hard Coating.

X25H Powder Metal Premium HSS with Premium Hard Coating, this is our best performing grade of PM-M48 HSS.

Excellent for all types of steel, tool steel etc. Suitable for cast iron, stainless, high strength materials, high nickel alloy, high temperature alloys.

Features V-notch Geometry for centering and less cutting force and Corner Chamfer for edge strength.

Inserts are self centering, drill from flat work surface without pre-drilled hole.

Dimensions for SDI4-06300-X25H (mm)

Diameter	Thickness	Series
63mm	7.94 - 5/16"	4

General Cutting parameters for SDI4-06300-X25H

Material	Hardness HB	Cutting Speed VC: m/min	Feed mm/rev	Application Choice
Non Alloyed Steel <0.25%C	100-150	38-70 (54)	0.29-0.54 (0.39)	Good
Non Alloyed Steel >0.25%C	175-225	35-64 (50)	0.27-0.50 (0.36)	Good
Non Alloyed Steel <0.55%C Quenched and Tempered	225-275	32-59 (45)	0.27-0.50 (0.36)	Good
Low Carbon steel l >0.55%C Annealed	275-325	25-36 (47)	0.25-0.45 (0.33)	Good
Low Carbon Steel l >0.55%C Quenched and Tempered	300	22-32 (41)	0.22-0.41 (0.30)	Good
Low Alloy Steel Annealed	175-225	33-62 (47)	0.25-0.45 (0.33)	Good
Low Alloy Steel Annealed	225-275	32-59 (45)	0.25-0.45 (0.33)	Good
Low Alloy Steel Annealed	275-235	28-53 (41)	0.22-0.41 (0.30)	Good
Low Alloy Steel Annealed	235-375	24-44 (34)	0.22-0.41 (0.30)	Good
High Alloy Steel Annealed	225-300	22-41 (32)	0.22-0.41 (0.30)	Good
High Alloy Steel Tempered	300-350	19-35 (27)	0.22-0.41 (0.30)	OK
Stainless Ferritic	185-275	16-29 (23)	0.21-0.39 (0.28)	Good
Stainless Martensitic	275-350	19-35 (27)	0.19-0.34 (0.25)	OK
Stainless Austenitic Annealed Hardened	135-185	18-32 (25)	0.21-0.39 (0.28)	Good
Stainless Austenitic Cast	185-275	18-32 (25)	0.19-0.34 (0.25)	Good
Super Duplex Stainless Ferritic	135-185	19-35 (27)	0.21-0.39 (0.28)	Good
Super Duplex Stainless Ferritic	185-275	16-29 (23)	0.19-0.34 (0.25)	OK
Grey Cast Iron Ferritic	120-150	38-70 (54)	0.35-0.65 (0.47)	Good
Grey Cast Iron Pearlitic	150-200	35-64 (50)	0.32-0.59 (0.43)	Good
Cast Iron Nodular Ferritic	200-220	32-59 (45)	0.27-0.50 (0.36)	Good
Cast Iron Nodular Pearlitic	220-260	32-59 (45)	0.22-0.41 (0.30)	OK
Cast Iron Malleable Ferritic	120-150	32-59 (45)	0.35-0.65 (0.47)	Good
Cast Iron Malleable Pearlitic	260-320	32-59 (45)	0.19-0.34 (0.25)	OK
Aluminium Wrought Alloys	30	47-88 (68)	0.32-0.59 (0.43)	OK
Aluminium Wrought Alloys Cured	180	41-76 (59)	0.32-0.59 (0.43)	OK
Aluminium Castings Si<12% Cured	30	47-88 (68)	0.32-0.59 (0.43)	OK
Aluminium Castings Si<12%	180	41-76 (59)	0.32-0.59 (0.43)	OK
Aluminium Alloys Si 12%-23%	-	41-76 (59)	0.32-0.59 (0.43)	OK
Copper Alloy Free Cutting	100-200	47-88 (68)	0.34-0.62 (0.45)	OK
Brass	200-250	47-88 (68)	0.22-0.41 (0.30)	OK
Copper Alloy >1% Pb	100	47-88 (68)	0.36-0.66 (0.48)	OK
Plastics	-	47-88 (68)	0.32-0.59 (0.43)	OK
Hard Rubber	60	47-88 (68)	0.32-0.59 (0.43)	OK
Hi-temp Alloys Iron Based Annealed	140-220	14-27 (20)	0.19-0.35 (0.26)	Good
Hi-temp Alloys Iron Based Cured	223-310	11-21 (16)	0.16-0.29 (0.21)	OK
Hi-temp Alloys Ni or Co Based Annealed	250	11-21 (16)	0.19-0.35 (0.26)	OK
Hi-temp Alloys Ni or Co Based Cured	350	11-21 (16)	0.16-0.29 (0.21)	OK
Hi-temp Alloys Ni or Co Based Cast	320	11-21 (16)	0.16-0.29 (0.21)	OK
Pure Titanium	320	11-21 (16)	0.19-0.35 (0.26)	Good
Titanium Alpha + Beta Alloys Rm1050	-	11-21 (16)	0.16-0.29 (0.21)	OK
Hardox, AR400, T1, Wear Plate	400	7-13 (10)	0.21-0.39 (0.28)	OK
Hardened Steel	300-400	9-16 (13)	0.21-0.39 (0.28)	OK