6mm Diameter 1 Flute Carbide End Mill for Aluminium 22mm Flute Length DLC Coated

6mm Diameter 1 Flute Carbide End Mill for Aluminium 22mm Flute Length DLC Coated
Zoom  Zoom
Our Price:  £11.40
List Price:  £17.10
Saving Of:  £5.70 (33%)
(Exc. 20% VAT)(£13.68 Inc. VAT)

Model:  EA1S-06062250DLC
Brand:  APT Carbide End Mills

Shipped Weight:  75 g


In stock, immediate despatch  

In stock, immediate despatch

APT Carbide End Mills

Carbide End Mills APT Brand

6mm Diameter 1 Flute Carbide End Mill for Aluminium 22mm Flute Length DLC Coated.

Also for use on Brass, Copper, Gold, Magnesium Alloy. Made from wear resistant Uncoated Carbide for increased tool life, can be used on Plastic Acrylic PVC and other Non-ferrous Metals when a cutter dedicated for these materials is not available.

DLC Diamond Like Carbon Coating can provide up to 100% increase in tool life, edge honed flutes with polished surface decrease cutting forces and are excellent in finishing operations. Can be used for dry cutting.

When possible choose cutter with the shortest flute length and least overhang.

Dimensions for EA1S-06062250DLC single flute milling cutter (in mm)
Cutting DiameterFlute LengthOverall LengthShank Diameter
Speeds and Feeds for router cutter, based on a max depth of 1 x diameter with high accuracy spindle and collets with optimum stability of spindle and workpiece holding, reduce feed rate for suboptimal conditions.
When cutting more than 1 x diameter reduce feed rate. For guidance only if vibration is produced try lowering the feed rate if not successful try raising feed very slowly, if no vibration is present increased feed rate may be possible.
AcrylicAluminium AlloyHard PlasticHardwoodLaminate
RPM 18000 Feed 3400 mm/minRPM 18000 Feed 1800 mm/minRPM 18000 Feed 2600 mm/minRPM 18000 Feed 3900 mm/minRPM 18000 Feed 3900 mm/min
Particle Board MDFPhenolicSoft PlasticPlywoodSolid Surface
RPM 18000 Feed 5700 mm/minRPM 18000 Feed 4800 mm/min

RPM 18000 Feed 3000 mm/min

RPM 18000 Feed 4800 mm/minRPM 18000 Feed 2600 mm/min

Continue ShoppingTell a Friend
Customer Reviews
Average Rating (1 Review):  
Write a Review and share your opinions!

Pretty Good
01 June 2023  |  Neil

We buy quite a few of these cutters, the machine operator says these are good cutters. Who am I to argue?

Was this helpful to you?  Yes  /  No

This review has not been appraised.