5mm Diameter 1 Flute Carbide End Mill for Plasics Acrylic PVC 32mm Flute Length

Our Price:	£9.00
List Price:	~~£13.50~~
Saving Of:	£4.50 (33%)

(Exc. 20% VAT)(£10.80 Inc. VAT)

Model: EP1S-05053255
Brand: APT Carbide End Mills

Shipped Weight: 55 g

Availability:

In stock, immediate despatch

APT Carbide End Mills

Carbide End Mills APT Brand

5mm Diameter 1 Flute Carbide End Mill for Plasics Acrylic PVC 32mm Flute Length.

Made from wear resistant Uncoated Carbide for increased tool life, can be used on Aluminium, Brass, Copper, Gold, Magnesium Alloy and other Non-ferrous Metals when a cutter dedicated for these materials is not available.

Honed edge flutes with polished surface decrease cutting forces and are excellent in finishing operations. Can be used for dry cutting.

When possible choose cutter with the shortest flute length and least overhang.

Dimensions for EP1S-05053255 single flute milling cutter (in mm)

Cutting Diameter	Flute Length	Overall Length	Shank Diameter
5mm	32mm	55mm	5

Speeds and Feeds for router cutter, based on a max depth of 1 x diameter with high accuracy spindle and collets with optimum stability of spindle and workpiece holding, reduce feed rate for suboptimal conditions.

When cutting more than 1 x diameter reduce feed rate. For guidance only if vibration is produced try lowering the feed rate if not successful try raising feed very slowly, if no vibration is present increased feed rate may be possible.

Acrylic	Aluminium Alloy	Hard Plastic	Hardwood	Laminate
RPM 18000 Feed 3000 mm/min	RPM 18000 Feed 2100 mm/min	RPM 18000 Feed 2500 mm/min	RPM 18000 Feed 3300 mm/min	RPM 18000 Feed 3500 mm/min

Particle Board MDF	Phenolic	Soft Plastic	Plywood	Solid Surface
RPM 18000 Feed 4800 mm/min	RPM 18000 Feed 3800 mm/min	RPM 18000 Feed 2900 mm/min	RPM 18000 Feed 4000 mm/min	RPM 18000 Feed 2400 mm/min