4mm Diameter 2 Flute Down Cut Carbide Router - Slot Drill for Wood, MDF etc. 22mm Flute Length

Our Price:	£8.00
List Price:	~~£12.00~~
Saving Of:	£4.00 (33%)

(Exc. 20% VAT)(£9.60 Inc. VAT)

Model: EDC2-442245
Brand: APT Carbide End Mills

Shipped Weight: 25 g

Availability:

In stock, immediate despatch

APT Carbide End Mills

Carbide End Mills APT Brand

4mm Diameter 2 Flute Down Cut Carbide Router - Slot Drill. 22mm Length of Cut, Overall Length 45mm, Shank Diameter 4mm.

For use on Soft and Flexible Materials including MDF, Hardwood, Softwood, Laminate Board, Plywood Particle Board and other Sheeting.

Downward Spiral Plunge cutting for elimination of burrs on the work surface by pushing the chips downwards.

Use lower feed rate when depth of cut increases, if possible use suitable work holding to reduce lifting of the work piece.

Clearance of cutting chips may be required to prevent chip jamming.

Choose cutters with the shortest flute length that is suitable for the job with as little overhang as possible.

Made from wear resistant Uncoated Carbide for increased tool life.

Dimensions for EDC2-442245

Cutting Diameter	Length of Cut	Overall Length	Shank Diameter
4mm	22mm	45mm	4mm

Speeds and Feeds, based on a max depth of 1 x diameter with high accuracy spindle and collets with optimum stability of spindle and workpiece holding, reduce feed rate for suboptimal conditions.

When cutting more than 1 x diameter reduce feed rate. For guidance only if vibration is produced try lowering the feed rate if not successful try raising feed very slowly, if no vibration is present increased feed rate may be possible.