Long Neck Rib Processing Carbide Cutter 1.5mm Dia 10mm Neck Length 50mm Long 55HRC

Our Price:	£10.00
List Price:	~~£15.00~~
Saving Of:	£5.00 (33%)

(Exc. 20% VAT)(£12.00 Inc. VAT)

Model: LN2S-0401510050-550
Brand: APT Carbide End Mills

Shipped Weight: 25 g

Availability:

In stock, immediate despatch

APT Carbide End Mills

Carbide End Mills APT Brand

Long Neck Rib Processing Carbide Cutter 1.5mm Diameter 10mm Neck Length 4mm Plain Shank 50mm Long 1.8mm Flute Length 2 Flutes AlTiNS Coated

Suitable for materials up to 55-58HRC, performs well on Cast Iron, Copper, Mould Tool and Die Steel, 304 Stainless

Dimensions for LN2S-0401510050-550 (mm)

Dia	Shank Dia	Flute Length	Neck Length	Length
1.5	4	1.8	10	50

Recommended Speeds and Feeds for Slot Milling

Use air cooling or minimum oil mist cooling

Plain Carbon and Alloy Steel, Cast Iron	Heat Resistant and Pre-Hardened Steel 35-45HRC	Hardened Steel 45-58HRC
RPM 17260, Feed 730 mm/min, Ap(mm) 0.053	RPM 16280, Feed 510 mm/min, Ap(mm) 0.042	RPM 14400 Feed 380 mm/min, Ap(mm) 0.029

Related Products - Spare Parts

Long Neck Rib Processing Carbide Cutter 0.6mm Dia 10mm Neck Length 50mm Long 55HRC~~£15.00~~ £10.00

Long Neck Rib Processing Carbide Cutter 0.8mm Dia 10mm Neck Length 50mm Long 55HRC~~£15.00~~ £10.00

Long Neck Rib Processing Carbide Cutter 1.2mm Dia 10mm Neck Length 50mm Long 55HRC~~£15.00~~ £10.00

Long Neck Rib Processing Carbide Cutter 1.4mm Dia 10mm Neck Length 50mm Long 55HRC~~£15.00~~ £10.00

Long Neck Rib Processing Carbide Cutter 1.6mm Dia 10mm Neck Length 50mm Long 55HRC~~£15.00~~ £10.00

Long Neck Rib Processing Carbide Cutter 1.8mm Dia 10mm Neck Length 50mm Long 55HRC~~£15.00~~ £10.00

Long Neck Rib Processing Carbide Cutter 1mm Dia 10mm Neck Length 50mm Long 55HRC~~£15.00~~ £10.00

Long Neck Rib Processing Carbide Cutter 2.5mm Dia 10mm Neck Length 50mm Long 55HRC~~£15.00~~ £10.00

Long Neck Rib Processing Carbide Cutter 2mm Dia 10mm Neck Length 50mm Long 55HRC~~£15.00~~ £10.00

Long Neck Rib Processing Carbide Cutter 3mm Dia 10mm Neck Length 50mm Long 55HRC~~£19.50~~ £13.00

Customer Reviews

Long Neck Rib Processing Carbide Cutter 1.5mm Dia 10mm Neck Length 50mm Long 55HRC

Average Rating (1 Review):

Write a Review and share your opinions!

Rating:

Fantastic

21 March 2016 | Lee

Machined the sides of a very deep pocket in silver steel in 2 operations of 53 mins each. Excellent surface finish and spot on tolerance. No visible wear on the tool, even under a loupe.

Very happy to recommend and will definitely buy again when I need another.

Was this helpful to you? Yes / No

This review has not been appraised.

	Shopping Basket