Home > Routing - Engraving > 2 Flute Up and Down Cut Carbide Routers for Wood MDF
Model: EUD2-551750Brand: APT Carbide End Mills
Shipped Weight: 54 g
Availability:
In stock, immediate despatch
Carbide End Mills APT Brand
5mm Diameter 2 Flute Up and Down Cut Carbide Router - Slot Drill. 17mm Flute Length, Overall Length 50mm, Shank Diameter 5mm.
For use on Soft and Flexible Materials including MDF, Hardwood, Softwood, Laminate Board, Plywood Particle Board and other Sheeting and Abrasive Materials.
Up and Down Cut Router Bits create a compression type cut for use when both top and bottom of the slot requires a good finish with the bottom of the router being up cut and the rest of the flute down cut helps to eliminate burrs, chipping of the work surface and de-lamination.
Use lower feed rate when depth of cut increases.
Clearance of cutting chips may be required to prevent chip jamming.
Choose cutters with the shortest flute length that is suitable for the job with as little overhang as possible.
Made from wear resistant Uncoated Carbide for increased tool life.
2.5mm Diameter 2 Flute Up Cut Carbide Router - Slot Drill for Wood, MDF etc. 17mm Flute Length£3.60 £2.40
3.175mm (1/8") Diameter 2 Flute Up and Down Cut Carbide Router - Slot Drill for Wood, MDF etc. 17mm Flute Length£12.00 £8.00
4mm Diameter 2 Flute Down Cut Carbide Router - Slot Drill for Wood, MDF etc. 17mm Flute Length£12.00 £8.00
4mm Diameter 2 Flute Up and Down Cut Carbide Router - Slot Drill for Wood, MDF etc. 17mm Flute Length£17.40 £11.60
4mm Diameter 2 Flute Up and Down Cut Carbide Router - Slot Drill for Wood, MDF etc. 22mm Flute Length£17.40 £11.60
4mm Diameter 2 Flute Up and Down Cut Carbide Router - Slot Drill for Wood, MDF etc. 25mm Flute Length£19.50 £13.00
4mm Diameter 2 Flute Up and Down Cut Carbide Router - Slot Drill for Wood, MDF etc. 32mm Flute Length£24.00 £16.00
5mm Diameter 2 Flute Up and Down Cut Carbide Router - Slot Drill for Wood, MDF etc. 22mm Flute Length£24.00 £16.00
5mm Diameter 2 Flute Up Cut Carbide Router - Slot Drill for Wood, MDF etc. 17mm Flute Length£6.60 £4.40
6mm Diameter 2 Flute Up and Down Cut Carbide Router - Slot Drill for Wood, MDF etc. 17mm Flute Length£30.00 £20.00
Be the first to Write a Review for this item!