4mm Diameter 2 Flute Up Cut Ball Nose Carbide Router for Wood, MDF etc. 52mm Flute Length

4mm Diameter 2 Flute Up Cut Ball Nose Carbide Router for Wood, MDF etc. 52mm Flute Length
Zoom  Zoom
Our Price:  £4.80
List Price:  £7.20
Saving Of:  £2.40 (33%)
(Exc. 20% VAT)(£5.76 Inc. VAT)

Model:  EUC2B-445275
Brand:  APT Carbide End Mills

Shipped Weight:  36 g

Availability:  

In stock, immediate despatch  

In stock, immediate despatch

APT Carbide End Mills

Carbide End Mills APT Brand


4mm Diameter 2 Flute Up Cut Ball Nose Carbide Router 52mm Length of Cut, Overall Length 75mm, Shank Diameter 4mm.

These 2 Flute Up Cut Ball Nose Spiral Routing Cutters made from Solid Carbide and offer high chip removal and will leave a good quality finish chips are pushed away from the work piece.

Good for 3D cutting and contouring or forming rounded bottom U shaped fluted chanels on Panels, Boards, Counter Tops etc.

Suitable for use on Hardwood, Softwood MDF, Laminate Board, Plywood, Particle Board and other Sheeting, Insulation Panels, PVC and Acrylic.

Use lower feed rate when depth of cut increases, choose cutters with the shortest flute length that are suitable for the job with as little overhang as possible. Clearance of cutting chips may be required.

Suitable for CNC, hand held and desktop routers.

Made from wear resistant Uncoated Carbide for increased tool life.

Dimensions for EUC2B-445275
Cutting DiameterLength of CutOverall LengthShank Diameter
4mm52mm75mm4mm
Speeds and Feeds, based on a max depth of 1 x diameter with high accuracy spindle and collets with optimum stability of spindle and workpiece holding, reduce feed rate for suboptimal conditions.
When cutting more than 1 x diameter reduce feed rate. For guidance only if vibration is produced try lowering the feed rate if not successful try raising feed very slowly, if no vibration is present increased feed rate may be possible.
AcrylicAluminium AlloyHard PlasticHardwoodLaminate
RPM 18000 Feed 3200 mm/minRPM 18000 Feed 2900 mm/minRPM 18000 Feed 2400 mm/minRPM 18000 Feed 3600 mm/minRPM 18000 Feed 3600 mm/min
Particle Board MDFPhenolicSoft PlasticPlywoodSolid Surface
RPM 18000 Feed 5000 mm/minRPM 18000 Feed 4800 mm/minRPM 18000 Feed 3000 mm/minRPM 18000 Feed 3600 mm/minRPM 18000 Feed 2300 mm/min

Continue ShoppingTell a Friend
Customer Reviews

Be the first to Write a Review for this item!

Search: