8mm Diameter 2 Flute Up Cut Ball Nose Carbide Router for Wood, MDF etc. 32mm Flute Length

8mm Diameter 2 Flute Up Cut Ball Nose Carbide Router for Wood, MDF etc. 32mm Flute Length
Zoom  Zoom
Our Price:  £13.00
List Price:  £19.50
Saving Of:  £6.50 (33%)
(Exc. 20% VAT)(£15.60 Inc. VAT)

Model:  EUC2B-883260
Brand:  APT Carbide End Mills

Shipped Weight:  49 g

Availability:  

Item is on a long delivery or is discontinued  

Item is on a long delivery or is discontinued

APT Carbide End Mills

Carbide End Mills APT Brand


8mm Diameter 2 Flute Up Cut Ball Nose Carbide Router 32mm Length of Cut, Overall Length 60mm, Shank Diameter 8mm.

These 2 Flute Up Cut Ball Nose Spiral Routing Cutters made from Solid Carbide and offer high chip removal and will leave a good quality finish chips are pushed away from the work piece.

Good for 3D cutting and contouring or forming rounded bottom U shaped fluted chanels on Panels, Boards, Counter Tops etc.

Suitable for use on Hardwood, Softwood MDF, Laminate Board, Plywood, Particle Board and other Sheeting, Insulation Panels, PVC and Acrylic.

Use lower feed rate when depth of cut increases, choose cutters with the shortest flute length that are suitable for the job with as little overhang as possible. Clearance of cutting chips may be required.

Suitable for CNC, hand held and desktop routers.

Made from wear resistant Uncoated Carbide for increased tool life.

Dimensions for EUC2B-883260
Cutting DiameterLength of CutOverall LengthShank Diameter
8mm32mm60mm8mm
Speeds and Feeds, based on a max depth of 1 x diameter with high accuracy spindle and collets with optimum stability of spindle and workpiece holding, reduce feed rate for suboptimal conditions.
When cutting more than 1 x diameter reduce feed rate. For guidance only if vibration is produced try lowering the feed rate if not successful try raising feed very slowly, if no vibration is present increased feed rate may be possible.
AcrylicAluminium AlloyHard PlasticHardwoodLaminate
RPM 18000 Feed 9100 mm/minRPM 18000 Feed 5800 mm/minRPM 18000 Feed 7500 mm/minRPM 18000 Feed 12000 mm/minRPM 18000 Feed 12000 mm/min
Particle Board MDFPhenolicSoft PlasticPlywoodSolid Surface
RPM 18000 Feed 16000 mm/minRPM 18000 Feed 13000 mm/min

RPM 18000 Feed 9000 mm/min

RPM 18000 Feed 14000 mm/minRPM 18000 Feed 7600 mm/min

Continue ShoppingTell a Friend
Customer Reviews

Be the first to Write a Review for this item!

Search: