ECD60-06025050TI Centre Drills 2.5mm x 60° Point 6mm Shank TiSiN Coated Carbide

(Exc. 20% VAT)(£12.00 Inc. VAT)

Model: ECD60-06025050TI
Brand: APT Carbide End Mills

Shipped Weight: 55 g

Availability:

In stock, immediate despatch

APT Carbide End Mills

Carbide End Mills APT Brand

ECD60-06025050TI Carbide Centre Drill 2.5mm x 60° Point.

6mm Shank 3mm Flute Length 50mm Long.

TiSiN Coated Carbide.

Suitable for Steel, Stainless, Cast Iron and General Use on Materials up to 55HRC.

Dimensions for ECD60-06025050TI (mm)

Point Diameter	Shank Diameter	Flute Length	Overall Length
2.5	6	3.0	50

General Cutting parameters

Material	Cutting Speed VC: m/min	Fz (Feed per tooth)	Application Choice
Non alloyed steel	70-80	0.08-0.10	Good
Low alloyed steel	50-70	0.06-0.08	Good
High alloyed steel - Tool Steel	35-45	0.06-0.08	Good
Stainless - Ferritic	25-35	0.02-0.02	Good
Stainless - Austenitic	20-30	0.02-0.02	Good
Grey cast iron Malleable	70-80	0.08-0.10	Good
Aluminium Castings Si<12%	130-200	0.02-0.04	OK but try uncoated
Aluminium Alloys Si >12%	100-160	0.02-0.04	OK but try uncoated
Bronze & Brass	80-100	0.02-0.04	OK but try uncoated
Nickel Alloys	15-25	0.02-0.02	OK
Titanium Alloys	20-30	0.02-0.03	Good
Hardened Steel up to 50HRC	15-25	0.02-0.02	OK