Carbide End Mill for General Use 4mm Diameter 4 Flute 75mm Long AlTiN Coated 45HRC

Carbide End Mill for General Use 4mm Diameter 4 Flute 75mm Long AlTiN Coated 45HRC
Zoom  Zoom
Our Price:  £6.80
List Price:  £10.20
Saving Of:  £3.40 (33%)
(Exc. 20% VAT)(£8.16 Inc. VAT)

Model:  4LFS-04040075-450
Brand:  APT Carbide End Mills

Shipped Weight:  65g

Availability:  

Incoming, 60-70 days  

Incoming, 60-70 days

APT Carbide End Mills

Carbide End Mills APT Brand


Carbide End Mill for General Use 4mm Diameter 4mm Plain Shank 75mm Long 20mm Flute Length 4 Flutes AlTiN Coated

Suitable for Steel, Cast Iron and General Use on Materials up to 45HRC

Dimensions for 4LFS-04040075-450 (mm)
Diameter Shank Dia Length Flute Length No of Flutes
4.0 4.0 75 20.0 4
Speeds and Feeds for Side Milling for Slot Milling reduce values by 40%-70%, use air coolant or high mist retardant liquid cooling
Cast Iron, Nodular Cast Iron Carbon Steel, Alloy Steel -750N/Mm2 Carbon Steel, Alloy Steel 30HRC Pre Hardened Quenched and Tempered Steel 40HRC Stainless Steel Pre Hardened Quenched and Tempered Steel 50HRC
RPM 10800 Feed 315 mm/min RPM 10800 Feed 315 mm/min RPM 10000 Feed 285 mm/min RPM 8000 Feed 240 mm/min RPM 5500 Feed 55 mm/min RPM 6500 Feed 190 mm/min

Customers who bought this item also bought:


Continue ShoppingTell a Friend
Customer Reviews
Carbide End Mill for General Use 4mm Diameter 4 Flute 75mm Long AlTiN Coated 45HRC
Average Rating (4 Reviews):  
Write a Review and share your opinions!

Rating:  
only used it acouple of times but works well
Tuesday, 14 July 2015  |  Sean

Used for cutting hardwoods that burn and mark easily, so requires a very hard and sharp end-mill. This work.very well to it's full.cutting depth

Was this helpful to you?  Yes  /  No

2 of 2 people found this review helpful.


Rating:  
end mill cutters
Tuesday, 23 June 2015  |  Adrian

The end mill cutter perchased where of good qualaty and protorm well. delivery very good.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Delivery
Friday, 25 July 2014  |  Tony

Very quick
Next day...

Was this helpful to you?  Yes  /  No

1 of 1 people found this review helpful.


Rating:  
end mill
Tuesday, 13 May 2014  |  Marc

very good end mill !

Was this helpful to you?  Yes  /  No

1 of 1 people found this review helpful.

Search: