Carbide End Mill for General Use 6mm Diameter 4 Flute AlTiN Coated 45HRC

Carbide End Mill for General Use 6mm Diameter 4 Flute AlTiN Coated 45HRC
Zoom  Zoom
Our Price:  £5.40
List Price:  £8.10
Saving Of:  £2.70 (33%)
(Exc. 20% VAT)(£6.48 Inc. VAT)

Model:  4SEM-06060050-450
Brand:  APT Carbide End Mills

Shipped Weight:  55g

Availability:  

In stock, immediate despatch  

In stock, immediate despatch

APT Carbide End Mills

Carbide End Mills APT Brand


Carbide End Mill for General Use 6mm Diameter 6mm Plain Shank 50mm Long 15mm Flute Length 4 Flutes AlTiN Coated.

Suitable for Steel, Cast Iron and General Use on Materials up to 45HRC.

Dimensions for 4SEM-06060050-450 (mm)
Diameter Shank Dia Length Flute Length No of Flutes
6.0 6.0 50 15.0 4
Speeds and Feeds for Side Milling for Slot Milling reduce values by 40%-70%, use air coolant or high mist retardant liquid cooling
Cast Iron, Nodular Cast Iron Carbon Steel, Alloy Steel -750N/Mm2 Carbon Steel, Alloy Steel 30HRC Pre Hardened Quenched and Tempered Steel 40HRC Stainless Steel Pre Hardened Quenched and Tempered Steel 50HRC
RPM 7000 Feed 675 mm/min RPM 7000 Feed 675 mm/min RPM 6400 Feed 620 mm/min RPM 5300 Feed 515 mm/min RPM 3700 Feed 120 mm/min RPM 4200 Feed 405 mm/min

Customers who bought this item also bought:


Continue ShoppingTell a Friend
Customer Reviews
Carbide End Mill for General Use 6mm Diameter 4 Flute AlTiN Coated 45HRC
Average Rating (4 Reviews):  
Write a Review and share your opinions!

Rating:  
Carbide end mills
Wednesday, 31 August 2016  |  Don

First class service very efficient and proffesional.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
6mm mill
Tuesday, 9 June 2015  |  Adrian

Used in modelmaking small parts in acetal. Works excellently with clean cutting.Also,delivered very quickly.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
6mm Mill
Thursday, 5 December 2013  |  Chris

Delivered the following day. (Less than 24 hours from placing the order!) Excellent service and a quality item.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Cutting out and pocketing
Friday, 1 March 2013  |  John

I have just completed a couple of intricate items, with 1/3of the time cutting out with XY cuts up to 3 mm, and the rest of the project pocketing, often at full 6mm width, though only 1.2mm z advances. I used plenty of fluid.
The results were excellent, and the cutter life was double that obtained from what until now was my cutter of choice, which cost almost twice as much. Incidentally, the service from shop-apt has been exemplary

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Search: