2mm Micro Diameter Carbide Drill 3.175mm (1/8") Shank 12mm Flute Length AlTiN Coated

Our Price:	£4.00
List Price:	~~£6.00~~
Saving Of:	£2.00 (33%)

(Exc. 20% VAT)(£4.80 Inc. VAT)

Notify me when this item is available

Model: 2MDD-030200-45-550
Brand: APT Carbide Drills

Shipped Weight: 20 g

Availability:

Incoming, 60-70 days

APT Carbide Drills

Carbide End Mills APT Brand

Micro Diameter Carbide Drill 2mm Diameter 3.175mm (1/8") Shank 12mm Flute Length 45mm Long AlTiN Coated Carbide.

Suitable for Use on Materials up to 55HRC also used in the Electronics Industry for PCB Drilling, Jewellery and Model Making.

Dimensions for 2MDD-030200-45-550 (mm)

Diameter	Shank Diameter	Flute Length	Overall Length
2.0	3.175 (1/8")	12.0	45

General Cutting parameters

Material	Hardness HB	RPM (min-1)	Feed (mm/rev)	Steps (mm)
General Steel	<180 HB	9,500	0.10	0.8
Alloyed steel	<40 HB	7,000	0.07	0.8
Stainless Steel	<200 HB	3,000	0.05	0.6
Cast Iron	Tensile Strength <350N/mm2	9,500	0.10	0.8
Aluminium Alloys	-	12,000	0.12	2.0

Related Products - Spare Parts

1.2mm Micro Diameter Carbide Drill 3.175mm (1/8") Shank 8mm Flute Length AlTiN Coated~~£6.00~~ £4.00

2.1mm Micro Diameter Carbide Drill 3.175mm (1/8") Shank 12mm Flute Length AlTiN Coated~~£6.00~~ £4.00

(1)

2.2mm Micro Diameter Carbide Drill 3.175mm (1/8") Shank 12mm Flute Length AlTiN Coated~~£7.50~~ £5.00

2.3mm Micro Diameter Carbide Drill 3.175mm (1/8") Shank 12mm Flute Length AlTiN Coated~~£7.50~~ £5.00

(1)

2.4mm Micro Diameter Carbide Drill 3.175mm (1/8") Shank 12mm Flute Length AlTiN Coated~~£7.50~~ £5.00

(1)

2.5mm Micro Diameter Carbide Drill 3.175mm (1/8") Shank 12mm Flute Length AlTiN Coated~~£7.50~~ £5.00

(2)

2.6mm Micro Diameter Carbide Drill 3.175mm (1/8") Shank 12mm Flute Length AlTiN Coated~~£7.50~~ £5.00

(1)

2.7mm Micro Diameter Carbide Drill 3.175mm (1/8") Shank 12mm Flute Length AlTiN Coated~~£7.50~~ £5.00

2.8mm Micro Diameter Carbide Drill 3.175mm (1/8") Shank 12mm Flute Length AlTiN Coated~~£7.50~~ £5.00

2.9mm Micro Diameter Carbide Drill 3.175mm (1/8") Shank 12mm Flute Length AlTiN Coated~~£7.50~~ £5.00

Customer Reviews

2mm Micro Diameter Carbide Drill 3.175mm (1/8") Shank 12mm Flute Length AlTiN Coated

Average Rating (1 Review):

Write a Review and share your opinions!

Rating:

2mm Carbide drill

14 August 2017 | Alan

This is a very good drill. I fitted it to a international 30 collet chuck on my Ajack milling machine and drilled a hard steel bolt to take a 2mm pin. Very well packed and fast shipping

Was this helpful to you? Yes / No

This review has not been appraised.

	Shopping Basket