SDI1-02200-X25H 22mm Series 1 Spade Drill Insert Premium HSS with Hard Coating

Zoom

Our Price: £21.50(Exc. 20% VAT)(£25.80 Inc. VAT)

Model: SDI1-02200-X25H
Brand: APT Carbide

Shipped Weight: 18 g

Availability:

53 in stock, no more available

APT Carbide

Carbide Inserts APT Brand utilising modern Base Grades, MT-CVD & PVD Coatings and proven Chip Geometries

22mm Diameter Series 1 Spade Drill Insert with Hard Coating.

X25H Powder Metal Premium HSS with Premium Hard Coating, this is our best performing grade of PM-M48 HSS.

Excellent for all types of steel, tool steel etc. Suitable for cast iron, stainless, high strength materials, high nickel alloy, high temperature alloys.

Inserts are self centering, drill from flat work surface without pre-drilled hole.

Dimensions for SDI1-02200-X25H (mm)

Diameter	Thickness	Series
22mm	3.97 - 5/32"	1

General Cutting parameters for SDI1-02200-X25H

Material	Hardness HB	Cutting Speed VC: m/min	Feed mm/rev	Application Choice
Non Alloyed Steel <0.25%C	100-150	38-70 (54)	0.17-0.31 (0.22)	Good
Non Alloyed Steel >0.25%C	175-225	35-64 (50)	0.13-0.23 (0.17)	Good
Non Alloyed Steel <0.55%C Quenched and Tempered	225-275	32-59 (45)	0.13-0.23 (0.17)	Good
Low Carbon steel l >0.55%C Annealed	275-325	25-36 (47)	0.12-0.22 (0.16)	Good
Low Carbon Steel l >0.55%C Quenched and Tempered	300	22-32 (41)	0.12-0.22 (0.16)	Good
Low Alloy Steel Annealed	175-225	33-62 (47)	0.13-0.23 (0.17)	Good
Low Alloy Steel Annealed	225-275	32-59 (45)	0.13-0.23 (0.17)	Good
Low Alloy Steel Annealed	275-235	28-53 (41)	0.12-0.22 (0.16)	Good
Low Alloy Steel Annealed	235-375	24-44 (34)	0.12-0.22 (0.16)	Good
High Alloy Steel Annealed	225-300	22-41 (32)	0.12-0.22 (0.16)	Good
High Alloy Steel Tempered	300-350	19-35 (27)	0.12-0.22 (0.16)	OK
Stainless Ferritic	185-275	16-29 (23)	0.12-0.22 (0.16)	Good
Stainless Martensitic	275-350	19-35 (27)	0.10-0.19 (0.14)	OK
Stainless Austenitic Annealed Hardened	135-185	18-32 (25)	0.10-0.19 (0.14)	Good
Stainless Austenitic Cast	185-275	18-32 (25)	0.09-0.17 (0.12)	Good
Super Duplex Stainless Ferritic	135-185	19-35 (27)	0.10-0.19 (0.14)	Good
Super Duplex Stainless Ferritic	185-275	16-29 (23)	0.09-0.17 (0.12)	OK
Grey Cast Iron Ferritic	120-150	38-70 (54)	0.21-0.39 (0.28)	Good
Grey Cast Iron Pearlitic	150-200	35-64 (50)	0.19-0.34 (0.25)	Good
Cast Iron Nodular Ferritic	200-220	32-59 (45)	0.16-0.29 (0.21)	Good
Cast Iron Nodular Pearlitic	220-260	32-59 (45)	0.12-0.22 (0.16)	OK
Cast Iron Malleable Ferritic	120-150	32-59 (45)	0.21-0.39 (0.28)	Good
Cast Iron Malleable Pearlitic	260-320	32-59 (45)	0.09-0.17 (0.12)	OK
Aluminium Wrought Alloys	30	47-88 (68)	0.13-0.23 (0.17)	OK
Aluminium Wrought Alloys Cured	180	41-76 (59)	0.21-0.39 (0.28)	OK
Aluminium Castings Si<12% Cured	30	47-88 (68)	0.21-0.39 (0.28)	OK
Aluminium Castings Si<12%	180	41-76 (59)	0.21-0.39 (0.28)	OK
Aluminium Alloys Si 12%-23%	-	41-76 (59)	0.21-0.39 (0.28)	OK
Copper Alloy Free Cutting	100-200	47-88 (68)	0.19-0.34 (0.25)	OK
Brass	200-250	47-88 (68)	0.12-0.22 (0.16)	OK
Copper Alloy >1% Pb	100	47-88 (68)	0.21-0.39 (0.28)	OK
Plastics	-	47-88 (68)	0.21-0.39 (0.28)	OK
Hard Rubber	60	47-88 (68)	0.21-0.39 (0.28)	OK
Hi-temp Alloys Iron Based Annealed	140-220	14-27 (20)	0.10-0.19 (0.14)	Good
Hi-temp Alloys Iron Based Cured	223-310	11-21 (16)	0.09-0.17 (0.12)	OK
Hi-temp Alloys Ni or Co Based Annealed	250	11-21 (16)	0.10-0.19 (0.14)	OK
Hi-temp Alloys Ni or Co Based Cured	350	11-21 (16)	0.09-0.17 (0.12)	OK
Hi-temp Alloys Ni or Co Based Cast	320	11-21 (16)	0.09-0.17 (0.12)	OK
Pure Titanium	320	11-21 (16)	0.10-0.19 (0.14)	Good
Titanium Alpha + Beta Alloys Rm1050	-	11-21 (16)	0.09-0.17 (0.12)	OK
Hardox, AR400, T1, Wear Plate	400	7-13 (10)	0.10-0.19 (0.14)	OK
Hardened Steel	300-400	9-16 (13)	0.10-0.19 (0.14)	OK