12mm Diameter 1 Flute Carbide End Mill for Aluminium 42mm Flute Length DLC Coated

Our Price:	£70.00
List Price:	~~£105.00~~
Saving Of:	£35.00 (33%)

(Exc. 20% VAT)(£84.00 Inc. VAT)

Model: EA1S-12124280DLC
Brand: APT Carbide End Mills

Shipped Weight: 195 g

Availability:

In stock, immediate despatch

APT Carbide End Mills

Carbide End Mills APT Brand

12mm Diameter 1 Flute Carbide End Mill for Aluminium 42mm Flute Length DLC Coated.

Also for use on Brass, Copper, Gold, Magnesium Alloy. Made from wear resistant Uncoated Carbide for increased tool life, can be used on Plastic Acrylic PVC and other Non-ferrous Metals when a cutter dedicated for these materials is not available.

DLC Diamond Like Carbon Coating can provide up to 100% increase in tool life, edge honed flutes with polished surface decrease cutting forces and are excellent in finishing operations. Can be used for dry cutting.

When possible choose cutter with the shortest flute length and least overhang.

Dimensions for EA1S-12124280DLC single flute milling cutter (in mm)

Cutting Diameter	Flute Length	Overall Length	Shank Diameter
12mm	42mm	80mm	12mm

Speeds and Feeds for router cutter, based on a max depth of 1 x diameter with high accuracy spindle and collets with optimum stability of spindle and workpiece holding, reduce feed rate for suboptimal conditions.

When cutting more than 1 x diameter reduce feed rate. For guidance only if vibration is produced try lowering the feed rate if not successful try raising feed very slowly, if no vibration is present increased feed rate may be possible.

Acrylic	Aluminium Alloy	Hard Plastic	Hardwood	Laminate
RPM 18000 Feed 5900 mm/min	RPM 18000 Feed 3900 mm/min	RPM 18000 Feed 4800 mm/min	RPM 18000 Feed 8700 mm/min	RPM 18000 Feed 10000 mm/min

Particle Board MDF	Phenolic	Soft Plastic	Plywood	Solid Surface
RPM 18000 Feed 11000 mm/min	RPM 18000 Feed 10000 mm/min	RPM 18000 Feed 5900 mm/min	RPM 18000 Feed 9500 mm/min	RPM 18000 Feed 4800 mm/min