3.175mm (1/8") Diameter 1 Flute Carbide End Mill Slot Drill for Aluminium 7mm Flute Length

Our Price:	£2.70
List Price:	~~£4.05~~
Saving Of:	£1.35 (33%)

(Exc. 20% VAT)(£3.24 Inc. VAT)

Model: EA1S-1-81-80738
Brand: APT Carbide End Mills

Shipped Weight: 20 g

Availability:

Only 11 left in stock - order soon

APT Carbide End Mills

Carbide End Mills APT Brand

3.175mm (1/8") Diameter 1 Flute End Mill Uncoated Carbide for Aluminium Flute Length 7mm, Overall Length 38mm, Shank Diameter 3.175mm (1/8").

Also for use on Brass, Copper, Gold, Magnesium Alloy. Made from wear resistant Uncoated Carbide for increased tool life, can be used on Plastic Acrylic PVC and other Non-ferrous Metals when a cutter dedicated for these materials is not available.

When possible choose cutter with the shortest flute length and least overhang.

Dimensions for EA1S-1-81-80738 single flute milling cutter

Cutting Diameter	Flute Length	Overall Length	Shank Diameter
3.175mm (1/8")	7.0mm	38mm	3.175mm - 1/8"

Speeds and Feeds for Slot Milling - Reduce Feed when Depth of Cut is more than 1.5xD

Acrylic	Aluminium Alloy
RPM 25000 Feed 2400 mm/min	RPM 18000 Feed 1700 mm/min

Speeds and Feeds for router cutter, based on a max depth of 1 x diameter with high accuracy spindle and collets with optimum stability of spindle and workpiece holding, reduce feed rate for suboptimal conditions.

When cutting more than 1 x diameter reduce feed rate. For guidance only if vibration is produced try lowering the feed rate if not successful try raising feed very slowly, if no vibration is present increased feed rate may be possible.

Acrylic	Aluminium Alloy	Hard Plastic	Hardwood	Laminate
RPM 18000 Feed 2200 mm/min	RPM 18000 Feed 2200 mm/min	RPM 18000 Feed 1800 mm/min	RPM 18000 Feed 2200 mm/min	RPM 18000 Feed 2200 mm/min

Particle Board MDF	Phenolic	Soft Plastic	Plywood	Solid Surface
RPM 18000 Feed 3200 mm/min	RPM 18000 Feed 2200 mm/min	RPM 18000 Feed 2700 mm/min	RPM 18000 Feed 2700 mm/min	RPM 18000 Feed 1800 mm/min