Home > HSS End Mills > 2 Flute Slot Drills HSS 8% Cobalt TiAlN Coated 40HRC
Model: GS2-06060057Brand: APT Tools
Shipped Weight: 25 g
Availability:
Only 33 left in stock - order soon
Tools for Indexable Inserts
6mm Diameter Slot Drill 2 Flute HSS High Speed Steel 8% Cobalt TiAlN Coated.
6mm Shank Diameter, 13mm Flute Length, 57mm Overall Length.
Centre Cutting with Flatted Weldon Shank. These Milling Cutters, End Mills are Made using Quality High Quality High Speed Steel with TiAlN Coating.
Suitable for Carbon, Alloy and Tool Steel up to 40HRC. Can also be used on Aluminium and Copper Alloys but consider un-coated cutters for non-ferrous materials.
If depth of cut is more that 0.5D then reduce the recommended feed rate, start with 75% of the above values then increase to the above values to find the ideal parameters for your setup ideally the max run out should max <0.010mm with the maximum rigidity possible.
If the machine can't make the RPM then try the following Vf=fz*n*z (n=actual RPM of the machine)
10mm Diameter Slot Drill 2 Flute HSS High Speed Steel 8% Cobalt TiAlN Coated£10.50 £7.00
12mm Diameter Slot Drill 2 Flute HSS High Speed Steel 8% Cobalt TiAlN Coated£14.70 £9.80
2mm Diameter Slot Drill 2 Flute HSS High Speed Steel 8% Cobalt TiAlN Coated£7.35 £4.90
3mm Diameter Slot Drill 2 Flute HSS High Speed Steel 8% Cobalt TiAlN Coated£7.35 £4.90
4mm Diameter Slot Drill 2 Flute HSS High Speed Steel 8% Cobalt TiAlN Coated£7.35 £4.90
5mm Diameter Slot Drill 2 Flute HSS High Speed Steel 8% Cobalt TiAlN Coated£7.35 £4.90
6mm Diameter Ball Nose Slot Drill 2 Flute HSS High Speed Steel 8% Co TiAlN Coated£9.90 £6.60
6mm Diameter Slot Drill 3 Flute HSS High Speed Steel 8% Cobalt TiAlN Coated£7.35 £4.90
6mm Diameter Throw Away Slot Drill 3 Flute HSS High Speed Steel 8% Coblat TiAlN Coated£6.30 £4.20
8mm Diameter Slot Drill 2 Flute HSS High Speed Steel 8% Cobalt TiAlN Coated£9.60 £6.60
Be the first to Write a Review for this item!
