10mm Diameter 2 Flute Up and Down Cut Carbide Router - Slot Drill for Wood, MDF etc. 45mm Flute Length

10mm Diameter 2 Flute Up and Down Cut Carbide Router - Slot Drill for Wood, MDF etc. 45mm Flute Length
Zoom  Zoom
Our Price:  £57.00
List Price:  £85.50
Saving Of:  £28.50 (33%)
(Exc. 20% VAT)(£68.40 Inc. VAT)

Model:  EUD2-10104585
Brand:  APT Carbide End Mills

Shipped Weight:  78 g

Availability:  

Only 9 left in stock - order soon  

Only 9 left in stock - order soon

APT Carbide End Mills

Carbide End Mills APT Brand


10mm Diameter 2 Flute Up and Down Cut Carbide Router - Slot Drill. 45mm Flute Length, Overall Length 85mm, Shank Diameter 10mm.

For use on Soft and Flexible Materials including MDF, Hardwood, Softwood, Laminate Board, Plywood Particle Board and other Sheeting and Abrasive Materials.

Up and Down Cut Router Bits create a compression type cut for use when both top and bottom of the slot requires a good finish with the bottom of the router being up cut and the rest of the flute down cut helps to eliminate burrs, chipping of the work surface and de-lamination.

Use lower feed rate when depth of cut increases.

Clearance of cutting chips may be required to prevent chip jamming.

Choose cutters with the shortest flute length that is suitable for the job with as little overhang as possible.

Made from wear resistant Uncoated Carbide for increased tool life.

Dimensions for EUD2-10104585
Cutting DiameterLength of CutCrossover LengthOverall LengthShank Diameter
10mm45mm7mm85mm10mm
Speeds and Feeds, based on a max depth of 1 x diameter with high accuracy spindle and collets with optimum stability of spindle and workpiece holding, reduce feed rate for suboptimal conditions.
When cutting more than 1 x diameter reduce feed rate. For guidance only if vibration is produced try lowering the feed rate if not successful try raising feed very slowly, if no vibration is present increased feed rate may be possible.
AcrylicHard PlasticHardwoodLaminate
RPM 18000 Feed 5200 mm/minRPM 18000 Feed 4500 mm/minRPM 18000 Feed 7800 mm/minRPM 18000 Feed 8100 mm/min
Particle Board MDFPhenolicSoft PlasticPlywoodSolid Surface
RPM 18000 Feed 9900 mm/minRPM 18000 Feed 8300 mm/minRPM 18000 Feed 5200 mm/minRPM 18000 Feed 8600 mm/minRPM 18000 Feed 4300 mm/min

Continue ShoppingTell a Friend
Customer Reviews

Be the first to Write a Review for this item!

Search: