4mm Diameter 2 Flute Up Cut Carbide Router - Slot Drill for Wood, MDF etc. 25mm Flute Length

4mm Diameter 2 Flute Up Cut Carbide Router - Slot Drill for Wood, MDF etc. 25mm Flute Length
Zoom  Zoom
Our Price:  £3.20
List Price:  £4.80
Saving Of:  £1.60 (33%)
(Exc. 20% VAT)(£3.84 Inc. VAT)

Model:  EUC2-442545
Brand:  APT Carbide End Mills

Shipped Weight:  23 g


No stock, despatch up to 4 weeks  

No stock, despatch up to 4 weeks

APT Carbide End Mills

Carbide End Mills APT Brand

4mm Diameter 2 Flute Up Cut Carbide Router - Slot Drill. 25mm Length of Cut, 45mm Overall Length, 4mm Shank Diameter.

These 2 Flute Spiral router bits are suitable for use on Hardwood, Softwood MDF, Laminate Board, Plywood, Particle Board and other Sheeting, Insulation Panels, PVC and Acrylic.

Up Cut Spiral Routing Cutters have a sharp cutting edge that push the chips towards the router. They will produce a good quality finish on the bottom of the slot while retaining a good cutting speed, if chipping of the top surface is a concern then consider down cut type tools. Suitable for plunge cutting.

Use lower feed rate when depth of cut increases, choose cutters with the shortest flute length that is suitable for the job with as little overhang as possible. Clearance of cutting chips may be required to prevent chip jamming.

Suitable for CNC, hand held and desktop routers.

Made from wear resistant Uncoated Carbide for increased tool life.

Dimensions for EUC2-442545
Cutting Diameter Length of Cut Overall Length Shank Diameter
4mm 25mm 45mm 4mm
Speeds and Feeds, based on a max depth of 1 x diameter with high accuracy spindle and collets with optimum stability of spindle and workpiece holding, reduce feed rate for suboptimal conditions.
When cutting more than 1 x diameter reduce feed rate. For guidance only if vibration is produced try lowering the feed rate if not successful try raising feed very slowly, if no vibration is present increased feed rate may be possible.
Acrylic Aluminium Alloy Hard Plastic Hardwood Laminate
RPM 18000 Feed 4300 mm/min RPM 18000 Feed 3800 mm/min RPM 18000 Feed 3300 mm/min RPM 18000 Feed 4600 mm/min RPM 18000 Feed 4700 mm/min
Particle Board MDF Phenolic Soft Plastic Plywood Solid Surface
RPM 18000 Feed 6300 mm/min RPM 18000 Feed 5200 mm/min RPM 18000 Feed 4400 mm/min RPM 18000 Feed 5400 mm/min RPM 18000 Feed 3200 mm/min

Continue ShoppingTell a Friend
Customer Reviews

Be the first to Write a Review for this item!