8mm Diameter 2 Flute Up Cut Carbide Router - Slot Drill for Wood, MDF etc. 32mm Flute Length

8mm Diameter 2 Flute Up Cut Carbide Router - Slot Drill for Wood, MDF etc. 32mm Flute Length
Zoom  Zoom
Our Price:  £12.00
List Price:  £18.00
Saving Of:  £6.00 (33%)
(Exc. 20% VAT)(£14.40 Inc. VAT)

Model:  EUC2-883260
Brand:  APT Carbide End Mills

Shipped Weight:  75 g

Availability:  

Only 10 left in stock - order soon  

Only 10 left in stock - order soon

APT Carbide End Mills

Carbide End Mills APT Brand


8mm Diameter 2 Flute Up Cut Carbide Router - Slot Drill. 32mm Length of Cut, 60mm Overall Length, 8mm Shank Diameter.

These 2 Flute Spiral router bits are suitable for use on Hardwood, Softwood MDF, Laminate Board, Plywood, Particle Board and other Sheeting, Insulation Panels, PVC and Acrylic.

Up Cut Spiral Routing Cutters have a sharp cutting edge that push the chips towards the router. They will produce a good quality finish on the bottom of the slot while retaining a good cutting speed, if chipping of the top surface is a concern then consider down cut type tools. Suitable for plunge cutting.

Use lower feed rate when depth of cut increases, choose cutters with the shortest flute length that is suitable for the job with as little overhang as possible. Clearance of cutting chips may be required to prevent chip jamming.

Suitable for CNC, hand held and desktop routers.

Made from wear resistant Uncoated Carbide for increased tool life.

Dimensions for EUC2-883260
Cutting Diameter Length of Cut Overall Length Shank Diameter
8mm 32mm 60mm 8mm
Speeds and Feeds, based on a max depth of 1 x diameter with high accuracy spindle and collets with optimum stability of spindle and workpiece holding, reduce feed rate for suboptimal conditions.
When cutting more than 1 x diameter reduce feed rate. For guidance only if vibration is produced try lowering the feed rate if not successful try raising feed very slowly, if no vibration is present increased feed rate may be possible.
Acrylic Aluminium Alloy Hard Plastic Hardwood Laminate
RPM 18000 Feed 9100 mm/min RPM 18000 Feed 5800 mm/min RPM 18000 Feed 7500 mm/min RPM 18000 Feed 12000 mm/min RPM 18000 Feed 12000 mm/min
Particle Board MDF Phenolic Soft Plastic Plywood Solid Surface
RPM 18000 Feed 16000 mm/min RPM 18000 Feed 13000 mm/min

RPM 18000 Feed 9000 mm/min

RPM 18000 Feed 14000 mm/min RPM 18000 Feed 7600 mm/min

Continue ShoppingTell a Friend
Customer Reviews

Be the first to Write a Review for this item!

Search: