Home > Carbide End Mills > Carbide End Mills for Titanium and HRSA 4 Flute AlTiN-ZrN Coated 60HRC
Model: HRSA-06060050-0.15CBrand: APT Carbide End Mills
Shipped Weight: 50 g
Availability:
In stock, immediate despatch
Carbide End Mills APT Brand
HRSA-06060050-0.15C 4 Flute Carbide End Mill for Titanum and HRSA 6mm Diameter with 0.15mm Corner Chamfer AlTiN-ZrN Coated 60HRC.
Performs excellent on Titanium Alloys, works well on other HRSA's, Heat Restistant Supper Alloys including Inconel, Cobalt, Nickel and Iron Based Alloys also for 304 and 316 Series Stainless Steel and moderately difficult Stainless,Grey Cast Iron and Soft Steels.
Good for materials up to 60HRC.
3 Flute End Mill for General Use 6mm Diameter AlTiN Coated Carbide 45HRC£9.00 £6.00
Carbide End Mill for General Use 6mm Diameter 4 Flute AlTiN Coated 45HRC£8.10 £5.40
Carbide End Mill for Stainless 6mm Diameter 4 Flute AlTiN Coated 55HRC£13.20 £8.80
Finishing End Mill 6mm Diameter 6 Flute AlTiN Coated Micro-grain Carbide 55HRC£19.80 £13.20
High Perfromance Carbide End Mill for General Use 6mm Diameter 2 Flute AlTiN Coated 55HRC£10.50 £7.00
High Perfromance Carbide End Mill for General Use 6mm Diameter 4 Flute AlTiN Coated 55HRC£10.50 £7.00
HRSA-04040050-0.15C 4 Flute Carbide End Mill for Titanum and HRSA 4mm Diameter with 0.15mm Corner Chamfer AlTiN-ZrN Coated 60HRC£7.50 £5.00
HRSA-08080060-0.15C 4 Flute Carbide End Mill for Titanum and HRSA 8mm Diameter with 0.15mm Corner Chamfer AlTiN-ZrN Coated 60HRC£24.00 £16.00
HRSA-10100075-0.2C 4 Flute Carbide End Mill for Titanum and HRSA 10mm Diameter with 0.2mm Corner Chamfer AlTiN-ZrN Coated 60HRC£33.00 £22.00
HRSA-12120075-0.25C 4 Flute Carbide End Mill for Titanum and HRSA 12mm Diameter with 0.25mm Corner Chamfer AlTiN-ZrN Coated 60HRC£42.00 £28.00
Be the first to Write a Review for this item!
