SNMG 190612 RP PC35 Carbide Inserts for Turning CVD Coated for Difficult Steel Turning

Our Price:	£9.27
List Price:	~~£13.91~~
Saving Of:	£4.64 (33%)

(Exc. 20% VAT)(£11.12 Inc. VAT)

Model: SNMG190612RPPC35
Brand: APT Carbide

Shipped Weight: 35g

Availability:

Only 20 left in stock - order soon

APT Carbide

Carbide Inserts APT Brand utilising modern Base Grades, MT-CVD & PVD Coatings and proven Chip Geometries

Carbide Inserts for Turning CVD Coated Grade PC35 (P35, M25 + CVD Ti(C,N) + Al2O3 Coating) with surface treatment) Main application High Alloy Steel & Steel under difficult conditions or low cutting speeds, extended application Stainless.

Geometry RP for roughing and interrupted cuts.

Dimensions for SNMG 190612 RP PC35 (mm)

Cutting Edge Length	Inscribed Circle or Height	Thickness	Hole Dia	Corner Radius	Side Clearance
12.7	12.7	4.76	5.16	0.8	0°

General Cutting parameters

Material	Hardness HB	Cutting Speed VC: m/min	Depth of Cut ap(mm)	Feed f(mm)
Non alloyed steel 0-0.45℅ C	150-250	170-190	3.2-7.6	0.6-1.0
Low alloyed steel	250-300	90-150	3.2-6.0	0.6-1.0
High alloyed steel	200	120-200	3.2-5.5	0.6-0.8
Corrosion resistant steel	200	140-180	3.2-5.5	0.6-0.8
Stainless - Ferritic	200	140-200	3.2-5.0	0.6-0.8
Stainless - Austenitic	180	110-190	3.2-5.0	0.6-0.8
Stainless - Duplex	230-260	80-150	3.2-5.0	0.6-0.8
Stainless - Martensitic	330	55-75	3.2-5.0	0.6-0.8

Customers who bought this item also bought:

1425 Torx Screw M2.5x0.45 - 5.5mm long - Torx 7: £2.10
BBS-D50-40 Boring Bar Sleeve 50mm OD 40mm ID 75mm long: £20.40
PSDNN 4040 S19-APT Turning Tool 40x40mm Shank uses SNMG 1906 Inserts: £64.00
PSSNR 3232 P19 Turning Tool-Holder 32x32mm Shank Right Hand uses SNMG 1906 Inserts Canela: £50.25
Spot Drill 16mm Diameter AlTiN Coated Carbide 90° Point: £58.00

	Customer Reviews
Be the first to Write a Review for this item!

	Shopping Basket