1.5mm Diameter 2 Flute Up Cut Carbide Router - Slot Drill for Wood, MDF etc. 7mm Flute Length

1.5mm Diameter 2 Flute Up Cut Carbide Router - Slot Drill for Wood, MDF etc. 7mm Flute Length
Zoom  Zoom
Our Price:  £2.40
List Price:  £3.60
Saving Of:  £1.20 (33%)
(Exc. 20% VAT)(£2.88 Inc. VAT)

Model:  EUC2-1-81.50738
Brand:  APT Carbide End Mills

Shipped Weight:  20 g

Availability:  

In stock, immediate despatch  

In stock, immediate despatch

APT Carbide End Mills

Carbide End Mills APT Brand


1.5mm Diameter 2 Flute Up Cut Carbide Router - Slot Drill. 7mm Length of Cut, Overall Length 38mm, Shank Diameter 3.175mm (1/8").

These 2 Flute Spiral router bits are suitable for use on Hardwood, Softwood MDF, Laminate Board, Plywood, Particle Board and other Sheeting, Insulation Panels, PVC and Acrylic.

Up Cut Spiral Routing Cutters have a sharp cutting edge that push the chips towards the router. They will produce a good quality finish on the bottom of the slot while retaining a good cutting speed, if chipping of the top surface is a concern then consider down cut type tools. Suitable for plunge cutting.

Use lower feed rate when depth of cut increases, choose cutters with the shortest flute length that is suitable for the job with as little overhang as possible. Clearance of cutting chips may be required to prevent chip jamming.

Suitable for CNC, hand held and desktop routers.

Made from wear resistant Uncoated Carbide for increased tool life.

Dimensions for EUC2-1-81.50738
Cutting Diameter Length of Cut Overall Length Shank Diameter
1.5mm 7mm 38mm 3.175mm - 1/8"
Speeds and Feeds, based on a max depth of 1 x diameter with high accuracy spindle and collets with optimum stability of spindle and workpiece holding, reduce feed rate for suboptimal conditions.
When cutting more than 1 x diameter reduce feed rate. For guidance only if vibration is produced try lowering the feed rate if not successful try raising feed very slowly, if no vibration is present increased feed rate may be possible.
Acrylic Aluminium Alloy Hard Plastic Hardwood Laminate
RPM 18000 Feed 1900 mm/min RPM 18000 Feed 2300 mm/min RPM 18000 Feed 1500 mm/min RPM 18000 Feed 1800 mm/min RPM 18000 Feed 1800 mm/min
Particle Board MDF Phenolic Soft Plastic Plywood Solid Surface
RPM 18000 Feed 2300 mm/min RPM 18000 Feed 1900 mm/min RPM 18000 Feed 2700 mm/min RPM 18000 Feed 2100 mm/min RPM 18000 Feed 1500 mm/min

Continue ShoppingTell a Friend
Customer Reviews
1.5mm Diameter 2 Flute Up Cut Carbide Router - Slot Drill for Wood, MDF etc. 7mm Flute Length
Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
good quality
Monday, 20 September 2021  |  Neil

have only used it once so far but happy with quality and packaging. Quick dispatch, good company to deal with.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Search: