10mm Diameter 3 Flute Ripper for Aluminium HSS 8% Cobalt

10mm Diameter 3 Flute Ripper for Aluminium HSS 8% Cobalt
Zoom  Zoom
Our Price:  £11.00
List Price:  £16.50
Saving Of:  £5.50 (33%)
(Exc. 20% VAT)(£13.20 Inc. VAT)

Model:  AR3-10100072
Brand:  APT Tools

Shipped Weight:  55 g

Availability:  

Only 88 left in stock - order soon  

Only 88 left in stock - order soon

APT Tools

Tools for Indexable Inserts


10mm Diameter 3 Flute Ripper for Aluminium HSS High Speed Steel 8% Cobalt Un-coated.

10mm Shank Diameter, 22mm Flute Length, 72mm Overall Length.

Centre Cutting with Flatted Weldon Shank. These Roughing End Mills are Made using Quality High Quality High Speed Steel.

Suitable for Aluminium, Brass, Copper Alloys and other Non-ferrous Materials. It is possible to use on Plain Carbon Steel and low Alloy Steel but consider TiAlN Coated Cutters for these Materials.

High Helix 40° Flute with sharp edge providing good chip evacuation and reducing the chances for chip jamming giving an improved surface finish.

Dimensions for AR3-10100072 (mm)
Diameter Shank Dia Length Flute Length No of Flutes
10.0 10.0 72 22.0 3
Recommended Speeds and Feeds for Side Milling.
Plain Carbon Steel <500N/mm2 Carbon Steel, Alloy Steel 20HRC <800N/mm2 Alloy Steel, Tool Steel 30HRC <1000N/mm2 Alloy Steel, Tool Steel 40HRC <1300N/mm2 Aluminium & Aluminium Alloys
RPM 1100 Feed 150 mm/min RPM 900 Feed 120 mm/min RPM 800 Feed 110 mm/min

RPM 450 Feed 60 mm/min

RPM 2500 Feed 350 mm/min
For slide milling, if depth of cut is more that 1.5D then reduce the recommended feed rate, start with 75% of the above values then increase to the above values to find the ideal parameters for your setup ideally the max run out should max <0.010mm with the maximum rigidity possible.

Continue ShoppingTell a Friend
Customer Reviews

Be the first to Write a Review for this item!

Search: