10mm Diameter Slot Drill 3 Flute HSS High Speed Steel 8% Cobalt TiAlN Coated

10mm Diameter Slot Drill 3 Flute HSS High Speed Steel 8% Cobalt TiAlN Coated
Zoom  Zoom
Our Price:  £7.20
List Price:  £10.80
Saving Of:  £3.60 (33%)
(Exc. 20% VAT)(£8.64 Inc. VAT)

Model:  GS3-10100072
Brand:  APT Tools

Shipped Weight:  55 g

Availability:  

Item is on a long delivery or is discontinued  

Item is on a long delivery or is discontinued

APT Tools

Tools for Indexable Inserts


10mm Diameter Slot Drill 3 Flute HSS High Speed Steel 8% Cobalt TiAlN Coated.

10mm Shank Diameter, 22mm Flute Length, 72mm Overall Length.

Centre Cutting with Flatted Weldon Shank. These Milling Cutters, End Mills are Made using High Quality High Speed Steel with TiAlN Coating.

Suitable for Carbon, Alloy and Tool Steel up to 40HRC. Can also be used on Aluminium and Copper Alloys but consider un-coated cutters for non-ferrous materials.

Dimensions for GS3-10100072 (mm)
Diameter Shank Dia Length Flute Length No of Flutes
10.0 10.0 72 22.0 3
Recommended Speeds and Feeds for Slot Milling.
Plain Carbon Steel <500N/mm2 Carbon Steel, Alloy Steel 20HRC <800N/mm2 Alloy Steel, Tool Steel 30HRC <1000N/mm2 Alloy Steel, Tool Steel 40HRC <1300N/mm2 Aluminium & Aluminium Alloys
RPM 1500 Feed 125 mm/min RPM 1300 Feed 110 mm/min RPM 1100 Feed 75 mm/min RPM 630 Feed 40 mm/min RPM 4300 Feed 380 mm/min

For slot milling, if depth of cut is more that 0.5D then reduce the recommended feed rate, start with 75% of the above values then increase to the above values to find the ideal parameters for your setup ideally the max run out should max <0.010mm with the maximum rigidity possible.

If the machine can't make the RPM then try the following Vf=fz*n*z (n=actual RPM of the machine)

 

Recommended Speeds and Feeds for Side Milling.
Plain Carbon Steel <500N/mm2 Carbon Steel, Alloy Steel 20HRC <800N/mm2 Alloy Steel, Tool Steel 30HRC <1000N/mm2 Alloy Steel, Tool Steel 40HRC <1300N/mm2 Aluminium & Aluminium Alloys
RPM 1500 Feed 210 mm/min RPM 1300 Feed 170 mm/min RPM 1100 Feed 125 mm/min RPM 630 Feed 70 mm/min RPM 4300 Feed 630 mm/min
For slide milling, if depth of cut is more that 1.5D then reduce the recommended feed rate, start with 75% of the above values then increase to the above values to find the ideal parameters for your setup ideally the max run out should max <0.010mm with the maximum rigidity possible.

Continue ShoppingTell a Friend
Customer Reviews
Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
3 flute slot drill cobalt coated
03 August 2020  |  Thomas

I’ve used these on toolsteel and alluminium and seems at home on both keeps a good edge with an excellent surface finish

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Search: