DCMT 070204 EF CM10 Cermet Inserts for Finishing Steel and Stainless

Our Price:	£4.36
List Price:	~~£6.55~~
Saving Of:	£2.19 (33%)

(Exc. 20% VAT)(£5.23 Inc. VAT)

Model: DCMT070204EFCM10
Brand: APT Carbide

Shipped Weight: 6 g

Availability:

Item is on a long delivery or is discontinued

APT Carbide

Carbide Inserts APT Brand utilising modern Base Grades, MT-CVD & PVD Coatings and proven Chip Geometries

Cermet Inserts for Finish Turning of Steel and Stainless in grade CM10 (P15, M10, K10) provides superb surface finish under stable conditions resulting in excellent productivity and predictable tool life, outstanding performance when finishing Stainless.

Grade CM10 is highly wear resistant and is suitable only for stable conditions with continuous cutting.

Geometry EF for Fine Finishing to Finishing Cuts

Dimensions for DCMT 070204 EF CM10 (mm)

Cutting Edge Length	Inscribed Circle or Height	Thickness	Hole Dia	Corner Radius	Side Clearance
7.75	6.35	2.38	2.8	0.4	7°

General Cutting parameters

Material	Hardness HB	Cutting Speed VC: m/min	Depth of Cut ap(mm)	Feed f(mm)
Non alloyed steel 0-0.45% C	150-250	230-270	0.1-1.5	0.05-0.18
Low alloyed steel	250-300	180-230	0.1-1.5	0.05-0.18
High alloyed steel	200	160-200	0.1-1.3	0.05-0.15
Corrosion resistant steel	200	230-270	0.1-1.3	0.05-0.15
Stainless - Ferritic	200	170-240	0.1-1.3	0.05-0.15
Stainless - Austenitic	180	200-240	0.1-1.3	0.05-0.15
Stainless - Martensitic	330	130-160	0.1-1.3	0.05-0.15
Grey cast iron	180	-	-	-
Spheroidal cast iron	160	220-300	0.1-1.5	0.05-0.18
Malleable / Tempered iron	130	250-350	0.1-1.5	0.05-0.18

Related Products - Spare Parts

CCMT 09T302 FA CM20 Cermet Inserts for Finishing Steel and Stainless~~£2.25~~ £1.50

CCMT 09T304 EF CM10 Cermet Inserts for Finishing Steel and Stainless~~£6.66~~ £4.44

CCMT 09T304 HQ CM20 Cermet Inserts for Finishing Steel and Stainless~~£2.25~~ £1.50

DCMT 070204 FM M250 Carbide Inserts for Turning PVD Coated for Finishing Stainless~~£6.55~~ £4.36

DCMT 070204 FP PC25 Carbide Inserts for Turning CVD Coated for Finishing Steel~~£6.55~~ £4.36

DCMT 11T302 FA CM20 Cermet Inserts for Finishing Steel and Stainless~~£2.25~~ £1.50

DCMT 11T304 FG PV20 Cermet Inserts for Finishing Steel and Stainless PVD Coated~~£2.70~~ £1.80

TCMT 110204 EF CM10 Cermet Inserts for Finishing Steel and Stainless~~£6.69~~ £4.46

(1)

TNMG 160404R-FS CM20 Cermet Inserts for Finishing Steel and Stainless~~£2.40~~ £1.60

VBMT 160408 HQ CM20 Cermet Inserts for Finishing Steel and Stainless~~£3.45~~ £2.30

Customer Reviews

Average Rating (1 Review):

Write a Review and share your opinions!

Rating:

DCMT 070204 EF CM10 cemet inserts

08 March 2016 | Kerr

Great inserts for finishing stainless,and thanks to APT for letting me know that I had ordered the wrong inserts for the holders I had ordered, great service

Was this helpful to you? Yes / No

This review has not been appraised.

	Shopping Basket