Spiral Flute Chamfering Milling Cutter 6mm Diameter AlTiN Coated Carbide 90° Point 4 Flute

Our Price:	£16.00
List Price:	~~£24.00~~
Saving Of:	£8.00 (33%)

(Exc. 20% VAT)(£19.20 Inc. VAT)

Model: SFCT4-06060050
Brand: APT Carbide End Mills

Shipped Weight: 55 g

Availability:

In stock, immediate despatch

APT Carbide End Mills

Carbide End Mills APT Brand

Spiral Flute Chamfering Milling Cutter 6mm Diameter AlTiN Coated Carbide 90° Point 4 Flute.

Can be used for chamfer and deburring operations it is possible to use the full cutting edge length due to the unique cutting edge this also reduces chance of vibration providing high quality finish and extends tool life by 300%-800% comparied to conventional straight edge chamfering cutters.

AlTiN Coated for General Use on materials up to 55HRC, performs well on Steel, Stainless, Cast Iron, High Temp Alloys, Copper Alloys and Hardened Steel.

Dimensions for SFCT4-06060050 (mm)

Diameter	Shank Diameter	Tip Diameter	Max Depth of Cut	Length	No of Flutes
6	6	2.0	2	50	4

Chamfering Speeds and Feeds - vc = surface cutting speed in m/min.

Cast Iron, Nodular Cast Iron	Carbon Steel, Alloy Steel -750N/Mm2	Pre Hardened Quenched and Tempered Steel 40HRC	Stainless Steel	High Temp Alloy	Aluminium Alloy
vc 170 m/min Feed 0.033 fz mm/tooth	vc 190 m/min Feed 0.036 fz mm/tooth	vc 140 m/min Feed 0.032 fz mm/tooth	vc 120 m/min Feed 0.025 fz mm/tooth	vc 45 m/min Feed 0.020 fz mm/tooth	vc 250m/min Feed 0.047 fz mm/tooth

De-burring Speeds and Feeds - vc = surface cutting speed in m/min.

Cast Iron, Nodular Cast Iron	Carbon Steel, Alloy Steel -750N/Mm2	Pre Hardened Quenched and Tempered Steel 40HRC	Stainless Steel	High Temp Alloy	Aluminium Alloy
vc 230 m/min Feed 0.055 fz mm/tooth	vc 250 m/min Feed 0.058 fz mm/tooth	vc 180 m/min Feed 0.050 fz mm/tooth	vc 160 m/min Feed 0.040 fz mm/tooth	vc 65 m/min Feed 0.030 fz mm/tooth	vc 330m/min Feed 0.074 fz mm/tooth