ADKT 1505 PDR-HM90 UM25 Carbide Milling Inserts PVD Coated for Steel & Stainless

Our Price:	£3.20
List Price:	~~£4.80~~
Saving Of:	£1.60 (33%)

(Exc. 20% VAT)(£3.84 Inc. VAT)

Model: ADKT1505PDR-HM90UM25
Brand: Uni-tip Carbide

Shipped Weight: 10 g

Availability:

In stock, immediate despatch

Uni-tip Carbide

Carbide Inserts with CVD & PVD Coating by Uni-tip

ADKT 1505 PDR-HM90 UM25 Carbide Inserts for Milling PVD Coated Grade UM25. M25, P35, K35 with Multi Layer PVD Coating for all types of Steel, Stainless and conditionally Hi-temp Alloys and Cast Iron.

Dimensions for ADKT 1505 PDR-HM90 UM25 (mm)

Cutting Edge Length	Inscribed Circle or Width	Thickness	Hole Dia	Corner Radius	Side Clearance
13	9.65	5.85	4.4	0.8	15°

General Cutting parameters

Material	Hardness HB	Cutting Speed VC: m/min	Depth of Cut ap(mm)	Feed f(mm)	Application Choice
Non alloyed steel 0-0.45% C	150-250	90-260 (170)	1-12	0.07-0.17	Good
Low alloyed steel	250-300	70-220 (160)	1-12	0.07-0.17	Good
High alloyed steel	200	70-180 (130)	1-7	0.07-0.15	Good
Corrosion resistant steel	200	70-190 (140)	1-8	0.07-0.15	Good
Stainless - Ferritic	200	60-250 (160)	1-7	0.07-0.15	Good
Stainless - Austenitic	180	60-250 (160)	1-7	0.07-0.15	Good
Stainless - Duplex	230-260	60-130 (100)	1-5	0.07-0.12	Good
Stainless - Martensitic	330	60-250 (160)	1-7	0.07-0.15	Good
Grey cast iron	180-260	60-130 (100)	1-12	0.07-0.17	OK
Spheroidal cast iron	160-260	90-160 (120)	1-12	0.07-0.17	OK
Malleable / Tempered iron	130-230	60-100 (70)	1-8	0.07-0.12	OK
Iron Based Hi-temp Alloys 200-280 HB	200-280	30-50 (40)	1-4	0.07-0.12	OK
Nickel or Cobalt Based 250 HB	250	15-30 (20)	1-4	0.07-0.12	OK
Nickel or Cobalt Based 30-58 HRC	350	15-25 (20)	1-3	0.07-0.12	OK
Hardened Steel	40-50HRC	45-60 (50)	1-3	0.07-0.12	OK