APKT 1003 PDR UM25 Carbide Milling Inserts PVD Coated for Steel & Stainless

Our Price:	£2.00
List Price:	~~£3.00~~
Saving Of:	£1.00 (33%)

(Exc. 20% VAT)(£2.40 Inc. VAT)

Model: APKT1003PDRUM25
Brand: Uni-tip Carbide

Shipped Weight: 5 g

Availability:

In stock, immediate despatch

Uni-tip Carbide

Carbide Inserts with CVD & PVD Coating by Uni-tip

APKT 1003 PDR UM25 Carbide Inserts for Milling PVD Coated Grade UM25 (M25, P35, K35 with Multi Layer NacO3 PVD Coating) for all types of Steel, Stainless and conditionally Hi-temp Alloys and Cast Iron

Dimensions for APKT 1003 PDR UM25 (mm)

Cutting Edge Length	Inscribed Circle or Width	Thickness	Hole Dia	Corner Radius	Side Clearance
11.09	6.66	3.5	2.8	0.4	11°

General Cutting parameters

Material	Hardness HB	Cutting Speed VC: m/min	Depth of Cut ap(mm)	Feed f(mm)	Application Choice
Non alloyed steel 0-0.45% C	150-250	70-170	1.0-6.0	0.08-0.15	Good
Low alloyed steel	250-300	70-170	1.0-6.0	0.08-0.15	Good
High alloyed steel	200	70-170	1.0-6.0	0.08-0.15	Good
Corrosion resistant steel	200	70-170	1.0-6.0	0.08-0.15	Good
Stainless - Ferritic	200	70-130	1.0-3.0	0.08-0.13	Good
Stainless - Austenitic	180	70-130	1.0-3.0	0.08-0.13	Good
Stainless - Duplex	230-260	70-130	1.0-3.0	0.08-0.13	Good
Stainless - Martensitic	330	70-130	1.0-3.0	0.08-0.13	Good
Grey cast iron	180	70-170	1.0-6.0	0.08-0.15	OK
Spheroidal cast iron	160	70-170	1.0-6.0	0.08-0.15	OK
Malleable / Tempered iron	130	70-170	1.0-6.0	0.08-0.15	OK