APKT 1003 PDR-S NK235 Carbide Inserts for Milling PVD Coated for Stainless APT

Our Price:	£6.02
List Price:	~~£9.03~~
Saving Of:	£3.01 (33%)

(Exc. 20% VAT)(£7.22 Inc. VAT)

Model: APKT1003PDRSNK235
Brand: APT Carbide

Shipped Weight: 5 g

Availability:

In stock, immediate despatch

APT Carbide

Carbide Inserts APT Brand utilising modern Base Grades, MT-CVD & PVD Coatings and proven Chip Geometries

Carbide Inserts for Milling PVD Coated Grade NK235 (P40–M35–S15 + PVD TiAlN Coating) Main application – Stainless & Hi–Temp Alloy, extended application – Alloy Steel

Geometry S for Alloy Steel, Stainless & Hi–Temp Alloy

Dimensions for APKT 1003 PDR-S NK235 (mm)

Cutting Edge Length	Inscribed Circle or Width	Thickness	Hole Dia	Corner Radius	Side Clearance
9.8	6.65	3.5	2.8	0.5	11°

General Cutting parameters

Material	Hardness HB	Cutting Speed VC: m/min	Depth of Cut ap(mm)	Feed f(mm)	Application Choice
Non alloyed steel 0-0.45% C	150-250	70-180	1.0-8.0	0.05-0.13	OK
Low alloyed steel	250-300	70-180	1.0-8.0	0.05-0.13	OK
High alloyed steel	200	70-180	1.0-8.0	0.05-0.13	OK
Corrosion resistant steel	200	70-180	1.0-8.0	0.05-0.13	OK
Stainless - Ferritic	200	50-130	1.0-6.5	0.05-0.13	Good
Stainless - Austenitic	180	50-130	1.0-6.5	0.05-0.13	Good
Stainless - Martensitic	330	50-130	1.0-6.5	0.05-0.13	Good
Iron Based Hi-temp Alloys	200-280	20-60	1.0-3.0	0.05-0.10	OK
Nickel or Cobalt Based 30-58 HRC	-	20-60	1.0-3.0	0.05-0.10	OK
Nickel or Cobalt Based 250 HB	250	20-60	1.0-3.0	0.05-0.10	OK
Pure Titanium	-	20-60	1.0-3.0	0.05-0.10	OK
Titanium Alpha + Beta Alloys	-	20-60	1.0-3.0	0.05-0.10	OK